Manage Sharded Cluster Balancer

Check the Balancer State

sh.getBalancerState() checks if the balancer is enabled (i.e. that the balancer is permitted to run). sh.getBalancerState() does not check if the balancer is actively balancing chunks.

To see if the balancer is enabled in your sharded cluster, run the following command, which returns a boolean:

sh.getBalancerState()

You can also see if the balancer is enabled using sh.status(). The currently-enabled field indicates whether the balancer is enabled, and the currently-running field indicates if the balancer is currently running.

Check if Balancer is Running

To see if the balancer process is active in your cluster:

1. Connect to any mongos in the cluster using the mongo shell.

2. Use the following operation to determine if the balancer is running:

   sh.isBalancerRunning()

Configure Default Chunk Size

The default chunk size for a sharded cluster is 64 megabytes. In most situations, the default size is appropriate for splitting and migrating chunks. For information on how chunk size affects deployments, see details, see Chunk Size.

Changing the default chunk size affects chunks that are processes during migrations and auto-splits but does not retroactively affect all chunks.

To configure default chunk size, see Modify Chunk Size in a Sharded Cluster.

Schedule the Balancing Window

In some situations, particularly when your data set grows slowly and a migration can impact performance, it is useful to ensure that the balancer is active only at certain times. The following procedure specifies the activeWindow, which is the timeframe during which the balancer will be able to migrate chunks:

use config

sh.startBalancer()

db.settings.updateOne(
   { _id: "balancer" },
   { $set: { activeWindow : { start : "<start-time>", stop : "<stop-time>" } } },
   { upsert: true }
)

Remove a Balancing Window Schedule

If you have set the balancing window and wish to remove the schedule so that the balancer is always running, use $unset to clear the activeWindow, as in the following:

use config
db.settings.updateOne( { _id : "balancer" }, { $unset : { activeWindow : true } } )

Disable the Balancer

By default, the balancer may run at any time and only moves chunks as needed. To disable the balancer for a short period of time and prevent all migration, use the following procedure:

1. Connect to any mongos in the cluster using the mongo shell.

2. Issue the following operation to disable the balancer:

   sh.stopBalancer()

   If a migration is in progress, the system will complete the in-progress migration before stopping.

   Starting in MongoDB 4.2, sh.stopBalancer() also disables auto-splitting for the sharded cluster.

3. To verify that the balancer won't start, run the following command, which returns false if the balancer is disabled:

   sh.getBalancerState()

   Optionally, to verify no migrations are in progress after disabling, issue the following operation in the mongo shell:

   use config
   while( sh.isBalancerRunning() ) {
             print("waiting...");
             sleep(1000);
   }

db.adminCommand( { balancerStop: 1 } )

Enable the Balancer

Use this procedure if you have disabled the balancer and are ready to re-enable it:

1. Connect to any mongos in the cluster using the mongo shell.

2. Issue one of the following operations to enable the balancer:

   From the mongo shell, issue:

   sh.startBalancer()

   Note

   To enable the balancer from a driver, use the balancerStart command against the admin database, as in the following:

   db.adminCommand( { balancerStart: 1 } )

   Starting in MongoDB 4.2, sh.startBalancer() also enables auto-splitting for the sharded cluster.

Disable Balancing During Backups

If MongoDB migrates a chunk during a backup, you can end with an inconsistent snapshot of your sharded cluster. Never run a backup while the balancer is active. To ensure that the balancer is inactive during your backup operation:

• Set the balancing window so that the balancer is inactive during the backup. Ensure that the backup can complete while you have the balancer disabled.

• manually disable the balancer for the duration of the backup procedure.

If you turn the balancer off while it is in the middle of a balancing round, the shut down is not instantaneous. The balancer completes the chunk move in-progress and then ceases all further balancing rounds.

Before starting a backup operation, confirm that the balancer is not active. You can use the following command to determine if the balancer is active:

!sh.getBalancerState() && !sh.isBalancerRunning()

When the backup procedure is complete you can reactivate the balancer process.

Disable Balancing on a Collection

You can disable balancing for a specific collection with the sh.disableBalancing() method. You may want to disable the balancer for a specific collection to support maintenance operations or atypical workloads, for example, during data ingestions or data exports.

When you disable balancing on a collection, MongoDB will not interrupt in progress migrations.

To disable balancing on a collection, connect to a mongos with the mongo shell and call the sh.disableBalancing() method.

For example:

sh.disableBalancing("students.grades")

The sh.disableBalancing() method accepts as its parameter the full namespace of the collection.

Enable Balancing on a Collection

You can enable balancing for a specific collection with the sh.enableBalancing() method.

When you enable balancing for a collection, MongoDB will not immediately begin balancing data. However, if the data in your sharded collection is not balanced, MongoDB will be able to begin distributing the data more evenly.

To enable balancing on a collection, connect to a mongos with the mongo shell and call the sh.enableBalancing() method.

For example:

sh.enableBalancing("students.grades")

The sh.enableBalancing() method accepts as its parameter the full namespace of the collection.

Confirm Balancing is Enabled or Disabled

To confirm whether balancing for a collection is enabled or disabled, query the collections collection in the config database for the collection namespace and check the noBalance field. For example:

db.getSiblingDB("config").collections.findOne({_id : "students.grades"}).noBalance;

This operation will return a null error, true, false, or no output:

• A null error indicates the collection namespace is incorrect.

• If the result is true, balancing is disabled.

• If the result is false, balancing is enabled currently but has been disabled in the past for the collection. Balancing of this collection will begin the next time the balancer runs.

• If the operation returns no output, balancing is enabled currently and has never been disabled in the past for this collection. Balancing of this collection will begin the next time the balancer runs.

You can also see if the balancer is enabled using sh.status(). The currently-enabled field indicates if the balancer is enabled.

Change Replication Behavior for Chunk Migration

use config
db.settings.updateOne(
   { "_id" : "balancer" },
   { $set : { "_secondaryThrottle" : { "w": "majority" }  } },
   { upsert : true }
)

db.getSiblingDB("config").settings.updateOne(
   { _id: "balancer" },
   { $set: { attemptToBalanceJumboChunks : true } },
   { upsert: true }
)

Change the Maximum Storage Size for a Given Shard

By default shards have no constraints in storage size. However, you can set a maximum storage size for a given shard in the sharded cluster. When selecting potential destination shards, the balancer ignores shards where a migration would exceed the configured maximum storage size.

The shards collection in the config database stores configuration data related to shards.

{ "_id" : "shard0000", "host" : "shard1.example.com:27100" }
{ "_id" : "shard0001", "host" : "shard2.example.com:27200" }

To limit the storage size for a given shard, use the db.collection.updateOne() method with the $set operator to create the maxSize field and assign it an integer value. The maxSize field represents the maximum storage size for the shard in megabytes.

The following operation sets a maximum size on a shard of 1024 megabytes:

config = db.getSiblingDB("config")
config.shards.updateOne( { "_id" : "<shard>"}, { $set : { "maxSize" : 1024 } } )

This value includes the mapped size of all data files on the shard, including the local and admin databases.

By default, maxSize is not specified, allowing shards to consume the total amount of available space on their machines if necessary.

You can also set maxSize when adding a shard.

To set maxSize when adding a shard, set the addShard command's maxSize parameter to the maximum size in megabytes. The following command run in the mongo shell adds a shard with a maximum size of 125 megabytes:

config = db.getSiblingDB("config")
config.runCommand( { addshard : "example.net:34008", maxSize : 125 } )