Docs Menu
Docs Home
/
MongoDB Manual
/ /

Configure Replica Set Tag Sets

On this page

  • Use Tag Sets in Read Preference
  • Custom Multi-Datacenter Write Concerns

A replica set member or members can be configured with tags:

{ "<tag1>": "<string1>", "<tag2>": "<string2>",... }

For read operations, you can specify a tag set in the read preferences to help direct read operations to members that have specific tag(s).

For write operations, you can use the tags to create a custom write concern.

If a replica set member or members are associated with tags, you can specify a tag set in the read preference to target those members. A tag set is an array of documents, where each document contains the tag and value pair(s). The specifications are tried in order until a match is found. Once found, that specification is used to find all eligible matching members.

Note

You cannot specify a tag set when specifying read preference mode primary.

For example, a replica set has the following replica set configuration (some of the fields have been omitted for brevity):

{
"_id" : "rs0",
"version" : 1,
"protocolVersion" : NumberLong(1),
"writeConcernMajorityJournalDefault" : true,
"members" : [
{ "_id" : 0, "host" : "mongodb0.example.net:27017", ..., "tags": { }, ... },
{ "_id" : 1, "host" : "mongodb1.example.net:27017", ..., "tags": { }, ... },
{ "_id" : 2, "host" : "mongodb2.example.net:27017", ..., "tags": { }, ... }
],
"settings" : {
...
}
}
  1. Add tags to the members.

    Connect mongosh to the replica set and use rs.reconfig() to add tags to the members:

    conf = rs.conf();
    conf.members[0].tags = { "dc": "east", "usage": "production" };
    conf.members[1].tags = { "dc": "east", "usage": "reporting" };
    conf.members[2].tags = { "dc": "west", "usage": "production" };
    rs.reconfig(conf);
  2. Verify the replica set configuration.

    Run rs.conf() to verify the replica set configuration (some of the fields have been omitted for brevity). The rs.conf() returns a document similar to the following:

    {
    "_id" : "rs0",
    "version" : 2,
    "protocolVersion" : NumberLong(1),
    "writeConcernMajorityJournalDefault" : true,
    "members" : [
    {
    "_id" : 0,
    "host" : "mongodb0.example.net:27017",
    ...
    "tags" : {
    "dc": "east",
    "usage": "production"
    },
    ...
    },
    {
    "_id" : 1,
    "host" : "mongodb1.example.net:27017",
    ...
    "tags" : {
    "dc": "east",
    "usage": "reporting"
    },
    ...
    },
    {
    "_id" : 2,
    "host" : "mongodb2.example.net:27017",
    ...
    "tags" : {
    "dc": "west",
    "usage": "production"
    },
    ...
    }
    ],
    "settings" : {
    ...
    }
    }
  3. Specify tag sets in the read preference.

    To direct read operations to the secondaries tagged with a particular tag(s), in the mongo shell connected to the replica set, you can use the readPref() method to specify the read preference mode and the tag set. For example,

    • To direct read operations to the secondary tagged with both "dc": "east" and "usage": "production", include the following tag set:

      db.collection.find({}).readPref( "secondary", [ { "dc": "east", "usage": "production" } ] )
    • To direct a read operation to the secondaries tagged with "dc": "east", and if not found, to secondaries tagged with "usage": "production", include the following tag set:

      db.collection.find({}).readPref( "secondary", [ { "dc": "east"}, { "usage": "production" } ] )

    Tip

    See also:

If a replica set member or members are associated with tags, you can configure the replica set's settings.getLastErrorModes setting to create a custom write concern.

Given a five member replica set with members in two data centers:

  1. a facility VA tagged dc_va

  2. a facility CA tagged dc_ca

{
"_id" : "rs0",
"version" : 1,
"protocolVersion" : NumberLong(1),
"writeConcernMajorityJournalDefault" : true,
"members" : [
{ "_id" : 0, "host" : "mongodb0.example.net:27017", ..., "tags": { }, ... },
{ "_id" : 1, "host" : "mongodb1.example.net:27017", ..., "tags": { }, ... },
{ "_id" : 2, "host" : "mongodb2.example.net:27017", ..., "tags": { }, ... }
{ "_id" : 3, "host" : "mongodb3.example.net:27017", ..., "tags": { }, ... }
{ "_id" : 4, "host" : "mongodb4.example.net:27017", ..., "tags": { }, ... }
],
"settings" : {
...
}
}
  1. Add tags to the replica set members.

    Connect mongosh to the replica set and use rs.reconfig() to add tags to the members:

    conf = rs.conf();
    conf.members[0].tags = { "dc_va": "rack1"};
    conf.members[1].tags = { "dc_va": "rack2"};
    conf.members[2].tags = { "dc_ca": "rack1"};
    conf.members[3].tags = { "dc_ca": "rack2"};
    conf.members[4].tags = { "dc_va": "rack1"};
    rs.reconfig(conf);
  2. Create a custom write concern.

    In the replica set configuration, define a custom write concern in the settings.getLastErrorModes setting. For example, the following defines the custom write concern MultipleDC that requires the write to propagate to two members with different dc_va tag values and one member with any dc_ca tag value.

    conf = rs.conf();
    conf.settings = { getLastErrorModes: { MultipleDC : { "dc_va": 2, "dc_ca": 1 } } };
    rs.reconfig(conf);

    Note

    The MultipleDC write concern is not satisfied if the write propagates to two members with the same "dc_va" tag. For example, if the write has only propagated to members[0] and members[4], "dc_va": 2 is not satisfied since they have the same tag value "rack1".

  3. Use the custom write concern.

    To use the custom write concern, pass in the write concern name to the w Option in the write concern:

    db.collection.insertOne(
    { id: "xyz", status: "A" },
    { writeConcern: { w: "MultipleDC" } }
    )

Back

Resync a Member of a Replica Set