Docs Menu
Docs Home
/
MongoDB Manual
/ /

Deploy a Geographically Redundant Replica Set

On this page

  • Overview
  • Considerations
  • Prerequisites
  • Procedures

This tutorial outlines the process for deploying a replica set with members in multiple locations. The tutorial addresses three-member replica sets and five-member replica sets. If you have an even number of replica set members, add another data bearing member, if possible, to deploy an odd number of voting members. [1]

For more information on distributed replica sets, see Replica Sets Distributed Across Two or More Data Centers. See also Replica Set Deployment Architectures and see Replication Reference.

[1](1, 2) If circumstances prohibit another data bearing member and you have an even number of voting members, you can add an arbiter instead. For considerations when using an arbiter, see Replica Set Arbiter.

In production, deploy each member of the replica set to its own machine. If possible, ensure that MongoDB listens on the default port of 27017.

Note

Outside of a rolling upgrade, all mongod members of a replica set should use the same major version of MongoDB.

For more information, see Replica Set Deployment Architectures.

Important

To avoid configuration updates due to IP address changes, use DNS hostnames instead of IP addresses. It is particularly important to use a DNS hostname instead of an IP address when configuring replica set members or sharded cluster members.

Use hostnames instead of IP addresses to configure clusters across a split network horizon. Starting in MongoDB 5.0, nodes that are only configured with an IP address fail startup validation and do not start.

Use the --bind_ip option to ensure that MongoDB listens for connections from applications on configured addresses.

Changed in version 3.6:

Warning

Before you bind your instance to a publicly-accessible IP address, you must secure your cluster from unauthorized access. For a complete list of security recommendations, see Security Checklist. At minimum, consider enabling authentication and hardening network infrastructure.
MongoDB binaries, mongod and mongos, bind to localhost by default. If the net.ipv6 configuration file setting or the --ipv6 command line option is set for the binary, the binary additionally binds to the localhost IPv6 address.By default mongod and mongos that are bound to localhost only accept connections from clients that are running on the same computer. This binding behavior includes mongosh and other members of your replica set or sharded cluster. Remote clients cannot connect to binaries that are bound only to localhost.To override the default binding and bind to other IP addresses, use the net.bindIp configuration file setting or the --bind_ip command-line option to specify a list of hostnames or IP addresses.

Warning

Starting in MongDB 5.0, split horizon DNS nodes that are only configured with an IP address fail startup validation and report an error. See disableSplitHorizonIPCheck.
For example, the following mongod instance binds to both the localhost and the hostname My-Example-Associated-Hostname, which is associated with the IP address 198.51.100.1:
mongod --bind_ip localhost,My-Example-Associated-Hostname
In order to connect to this instance, remote clients must specify the hostname or its associated IP address 198.51.100.1:
mongosh --host My-Example-Associated-Hostname
mongosh --host 198.51.100.1

Ensure that network traffic can pass securely between all members of the set and all clients in the network .

Consider the following:

  • Establish a virtual private network. Ensure that your network topology routes all traffic between members within a single site over the local area network.

  • Configure access control to prevent connections from unknown clients to the replica set.

  • Configure networking and firewall rules so that incoming and outgoing packets are permitted only on the default MongoDB port and only from within your deployment. See the IP Binding considerations.

Ensure that each member of a replica set is accessible by way of resolvable DNS or hostnames. You should either configure your DNS names appropriately or set up your systems' /etc/hosts file to reflect this configuration.

Each member must be able to connect to every other member. For instructions on how to check your connection, see Test Connections Between all Members.

Create the directory where MongoDB stores data files before deploying MongoDB.

Specify the mongod configuration in a configuration file stored in /etc/mongod.conf or a related location.

For more information about configuration options, see Configuration File Options.

If possible, use an odd number of data centers, and choose a distribution of members that maximizes the likelihood that even with a loss of a data center, the remaining replica set members can form a majority or at minimum, provide a copy of your data.

Never deploy more than seven voting members.

For all configurations in this tutorial, deploy each replica set member on a separate system. Although you may deploy more than one replica set member on a single system, doing so reduces the redundancy and capacity of the replica set. Such deployments are typically for testing purposes.

This tutorial assumes you have installed MongoDB on each system that will be part of your replica set. If you have not already installed MongoDB, see the installation tutorials.

Important

To avoid configuration updates due to IP address changes, use DNS hostnames instead of IP addresses. It is particularly important to use a DNS hostname instead of an IP address when configuring replica set members or sharded cluster members.

Use hostnames instead of IP addresses to configure clusters across a split network horizon. Starting in MongoDB 5.0, nodes that are only configured with an IP address fail startup validation and do not start.

For a geographically redundant three-member replica set deployment, you must decide how to distribute your system. Some possible distributions for the three members are:

  • Across Three Data Centers: One member to each site.

  • Across Two Data Centers: Two members to Site A and one member to Site B. If one of the members of the replica set is an arbiter [1], distribute the arbiter to Site A with a data-bearing member.

Note

Distributing replica set members across two data centers provides benefit over a single data center. In a two data center distribution,

  • If one of the data centers goes down, the data is still available for reads unlike a single data center distribution.

  • If the data center with a minority of the members goes down, the replica set can still serve write operations as well as read operations.

  • However, if the data center with the majority of the members goes down, the replica set becomes read-only.

If possible, distribute members across at least three data centers. For config server replica sets (CSRS), the best practice is to distribute across three (or more depending on the number of members) centers. If the cost of the third data center is prohibitive, one distribution possibility is to evenly distribute the data bearing members across the two data centers and store the remaining member in the cloud if your company policy allows.

1

For each member, start a mongod instance with the following settings:

  • Set replication.replSetName option to the replica set name. If your application connects to more than one replica set, each set must have a distinct name.

  • Set net.bindIp option to the hostname/ip or a comma-delimited list of hostnames/ips.

  • Set any other settings as appropriate for your deployment.

In this tutorial, the three mongod instances are associated with the following hosts:

Replica Set Member
Hostname
Member 0
mongodb0.example.net
Member 1
mongodb1.example.net
Member 2
mongodb2.example.net

The following example specifies the replica set name and the ip binding through the --replSet and --bind_ip command-line options:

Warning

Before you bind your instance to a publicly-accessible IP address, you must secure your cluster from unauthorized access. For a complete list of security recommendations, see Security Checklist. At minimum, consider enabling authentication and hardening network infrastructure.

mongod --replSet "rs0" --bind_ip localhost,<hostname(s)|ip address(es)>

For <hostname(s)|ip address(es)>, specify the hostname(s) and/or ip address(es) for your mongod instance that remote clients (including the other members of the replica set) can use to connect to the instance.

Alternatively, you can also specify the replica set name and the ip addresses in a configuration file:

replication:
replSetName: "rs0"
net:
bindIp: localhost,<hostname(s)|ip address(es)>

To start mongod with a configuration file, specify the configuration file's path with the --config option:

mongod --config <path-to-config>

In production deployments, you can configure a init script to manage this process. Init scripts are beyond the scope of this document.

2

From the same machine where one of the mongod is running (in this tutorial, mongodb0.example.net), start mongosh. To connect to the mongod listening to localhost on the default port of 27017, simply issue:

mongosh

Depending on your path, you may need to specify the path to the mongosh binary.

If your mongod is not running on the default port, specify the --port option for mongosh.

3

From mongosh, run rs.initiate() on replica set member 0.

Important

Run rs.initiate() on just one and only one mongod instance for the replica set.

Important

To avoid configuration updates due to IP address changes, use DNS hostnames instead of IP addresses. It is particularly important to use a DNS hostname instead of an IP address when configuring replica set members or sharded cluster members.

Use hostnames instead of IP addresses to configure clusters across a split network horizon. Starting in MongoDB 5.0, nodes that are only configured with an IP address fail startup validation and do not start.

rs.initiate( {
_id : "rs0",
members: [
{ _id: 0, host: "mongodb0.example.net:27017" },
{ _id: 1, host: "mongodb1.example.net:27017" },
{ _id: 2, host: "mongodb2.example.net:27017" }
]
})

MongoDB initiates a replica set, using the default replica set configuration.

4

Use rs.conf() to display the replica set configuration object:

rs.conf()

The replica set configuration object resembles the following:

{
"_id" : "rs0",
"version" : 1,
"protocolVersion" : NumberLong(1),
"members" : [
{
"_id" : 0,
"host" : "mongodb0.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
},
{
"_id" : 1,
"host" : "mongodb1.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
},
{
"_id" : 2,
"host" : "mongodb2.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
}
],
"settings" : {
"chainingAllowed" : true,
"heartbeatIntervalMillis" : 2000,
"heartbeatTimeoutSecs" : 10,
"electionTimeoutMillis" : 10000,
"catchUpTimeoutMillis" : -1,
"getLastErrorModes" : {
},
"getLastErrorDefaults" : {
"w" : 1,
"wtimeout" : 0
},
"replicaSetId" : ObjectId("585ab9df685f726db2c6a840")
}
}
5

In some cases, you may prefer that the members in one data center be elected primary before the members in the other data centers. You can modify the priority of the members such that the members in the one data center has higher priority than the members in the other data centers.

Some members of the replica set, such as members that have networking restraint or limited resources, should not be able to become primary in a failover. Configure members that should not become primary to have priority 0.

For example, to lower the relative eligibility of the member located in one of the sites (in this example, mongodb2.example.net), set the member's priority to 0.5.

  1. View the replica set configuration to determine the members array position for the member. Keep in mind the array position is not the same as the _id:

    rs.conf()
  2. Copy the replica set configuration object to a variable (to cfg in the example below). Then, in the variable, set the correct priority for the member. Then pass the variable to rs.reconfig() to update the replica set configuration.

    For example, to set priority for the third member in the array (i.e., the member at position 2), issue the following sequence of commands:

    cfg = rs.conf()
    cfg.members[2].priority = 0.5
    rs.reconfig(cfg)

    Note

    The rs.reconfig() shell method can force the current primary to step down, causing an election. When the primary steps down, all clients will disconnect. This is the intended behavior. While median time to elect a new primary should not typically exceed 12 seconds, always make sure any replica configuration changes occur during scheduled maintenance periods.

After these commands return, you have a geographically redundant three-member replica set.

6

Use rs.status() to identify the primary in the replica set.

Important

To avoid configuration updates due to IP address changes, use DNS hostnames instead of IP addresses. It is particularly important to use a DNS hostname instead of an IP address when configuring replica set members or sharded cluster members.

Use hostnames instead of IP addresses to configure clusters across a split network horizon. Starting in MongoDB 5.0, nodes that are only configured with an IP address fail startup validation and do not start.

For a geographically redundant five-member replica set deployment, you must decide how to distribute your system. Some possible distributions for the five members are:

  • Across Three Data Centers: Two members in Site A, two members in Site B, one member in Site C.

  • Across Four Data Centers: Two members in one site, and one member in the other three sites.

  • Across Five Data Centers: One member in each site.

  • Across Two Data Centers: Three members in Site A and two members in Site B. If possible, avoid distributing config server replica set across only two data centers.

Note

Distributing replica set members across two data centers provides benefit over a single data center. In a two data center distribution,

  • If one of the data centers goes down, the data is still available for reads unlike a single data center distribution.

  • If the data center with a minority of the members goes down, the replica set can still serve write operations as well as read operations.

  • However, if the data center with the majority of the members goes down, the replica set becomes read-only.

If possible, distribute members across at least three data centers. For config server replica sets (CSRS), the best practice is to distribute across three (or more depending on the number of members) centers. If the cost of the third data center is prohibitive, one distribution possibility is to evenly distribute the data bearing members across the two data centers and store the remaining member in the cloud if your company policy allows.

1

For each member, start a mongod instance with the following settings:

  • Set replication.replSetName option to the replica set name,

    If your application connects to more than one replica set, each set must have a distinct name. Some drivers group replica set connections by replica set name.

  • Set net.bindIp option to the hostname/ip address or a comma-delimited list of hostnames/ip addresses, and

  • Set any other settings as appropriate for your deployment.

In this tutorial, the five mongod instances are associated with the following hosts:

Replica Set Member
Hostname
Member 0
mongodb0.example.net
Member 1
mongodb1.example.net
Member 2
mongodb2.example.net
Member 3
mongodb3.example.net
Member 4
mongodb4.example.net

The following example specifies the replica set name and the ip binding through the --replSet and --bind_ip command-line options:

Warning

Before you bind your instance to a publicly-accessible IP address, you must secure your cluster from unauthorized access. For a complete list of security recommendations, see Security Checklist. At minimum, consider enabling authentication and hardening network infrastructure.

mongod --replSet "rs0" --bind_ip localhost,<hostname(s)|ip address(es)>

For <hostname(s)|ip address(es)>, specify the hostname(s) and/or ip address(es) for your mongod instance that remote clients (including the other members of the replica set) can use to connect to the instance.

Alternatively, you can also specify the replica set name and the hostnames/ip addresses in a configuration file:

replication:
replSetName: "rs0"
net:
bindIp: localhost,<hostname(s)|ip address(es)>

To start mongod with a configuration file, specify the configuration file's path with the --config option:

mongod --config <path-to-config>

In production deployments, you can configure a init script to manage this process. Init scripts are beyond the scope of this document.

2

From the same machine where one of the mongod is running (in this tutorial, mongodb0.example.net), start mongosh. To connect to the mongod listening to localhost on the default port of 27017, simply issue:

mongosh

Depending on your path, you may need to specify the path to the mongosh binary.

If your mongod is not running on the default port, specify the --port option for mongosh.

3

From mongosh, run rs.initiate() on replica set member 0.

Important

Run rs.initiate() on just one and only one mongod instance for the replica set.

rs.initiate( {
_id : "rs0",
members: [
{ _id: 0, host: "mongodb0.example.net:27017" },
{ _id: 1, host: "mongodb1.example.net:27017" },
{ _id: 2, host: "mongodb2.example.net:27017" },
{ _id: 3, host: "mongodb3.example.net:27017" },
{ _id: 4, host: "mongodb4.example.net:27017" }
]
})
4

Use rs.conf() to display the replica set configuration object:

rs.conf()

The replica set configuration object resembles the following:

{
"_id" : "rs0",
"version" : 1,
"protocolVersion" : NumberLong(1),
"writeConcernMajorityJournalDefault" : true,
"members" : [
{
"_id" : 0,
"host" : "mongodb0.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
},
{
"_id" : 1,
"host" : "mongodb1.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
},
{
"_id" : 2,
"host" : "mongodb2.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
},
{
"_id" : 3,
"host" : "mongodb3.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
},
{
"_id" : 4,
"host" : "mongodb4.example.net:27017",
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 1,
"tags" : {
},
"secondaryDelaySecs" : NumberLong(0),
"votes" : 1
}
],
"settings" : {
"chainingAllowed" : true,
"heartbeatIntervalMillis" : 2000,
"heartbeatTimeoutSecs" : 10,
"electionTimeoutMillis" : 10000,
"catchUpTimeoutMillis" : -1,
"catchUpTakeoverDelayMillis" : 30000,
"getLastErrorModes" : {
},
"getLastErrorDefaults" : {
"w" : 1,
"wtimeout" : 0
},
"replicaSetId" : ObjectId("5df2c9ccc21c478b838b98d6")
}
}
5

In some cases, you may prefer that the members in one data center be elected primary before the members in the other data centers. You can modify the priority of the members such that the members in the one data center has higher priority than the members in the other data centers.

Some members of the replica set, such as members that have networking restraint or limited resources, should not be able to become primary in a failover. Configure members that should not become primary to have priority 0.

For example, to lower the relative eligibility of the member located in one of the sites (in this example, mongodb2.example.net), set the member's priority to 0.5.

  1. View the replica set configuration to determine the members array position for the member. Keep in mind the array position is not the same as the _id:

    rs.conf()
  2. Copy the replica set configuration object to a variable (to cfg in the example below). Then, in the variable, set the correct priority for the member. Then pass the variable to rs.reconfig() to update the replica set configuration.

    For example, to set priority for the third member in the array (i.e., the member at position 2), issue the following sequence of commands:

    cfg = rs.conf()
    cfg.members[2].priority = 0.5
    rs.reconfig(cfg)

    Note

    The rs.reconfig() shell method can force the current primary to step down, causing an election. When the primary steps down, all clients will disconnect. This is the intended behavior. While median time to elect a new primary should not typically exceed 12 seconds, always make sure any replica configuration changes occur during scheduled maintenance periods.

After these commands return, you have a geographically redundant five-member replica set.

6

Use rs.status() to identify the primary in the replica set.

Back

Deploy a Replica Set for Testing and Development