db.collection.update()

Replace Document Operations on a Sharded Collection

Starting in MongoDB 4.2, replace document operations attempt to target a single shard, first by using the query filter. If the operation cannot target a single shard by the query filter, it then attempts to target by the replacement document.

In earlier versions, the operation attempts to target using the replacement document.

upsert on a Sharded Collection

For a db.collection.update() operation that includes upsert: true and is on a sharded collection, you must include the full shard key in the filter:

• For an update operation.

• For a replace document operation (starting in MongoDB 4.2).

However, starting in version 4.4, documents in a sharded collection can be missing the shard key fields. To target a document that is missing the shard key, you can use the null equality match in conjunction with another filter condition (such as on the _id field). For example:

{ _id: <value>, <shardkeyfield>: null } // _id of the document missing shard key

Shard Key Modification

Starting in MongoDB 4.2, you can update a document's shard key value unless the shard key field is the immutable _id field. In MongoDB 4.2 and earlier, a document's shard key field value is immutable.

To modify the existing shard key value with db.collection.update():

• You must run on a mongos. Do not issue the operation directly on the shard.

• You must run either in a transaction or as a retryable write.

• You must specify multi: false.

• You must include an equality query filter on the full shard key.

See also upsert on a Sharded Collection.

Missing Shard Key

Starting in version 4.4, documents in a sharded collection can be missing the shard key fields. To use db.collection.update() to set the document's missing shard key, you must run on a mongos. Do not issue the operation directly on the shard.

In addition, the following requirements also apply:

See also:

• upsert on a Sharded Collection

• Missing Shard Key Fields

Upsert within Transactions

Starting in MongoDB 4.4, you can create collections and indexes inside a multi-document transaction if the transaction is not a cross-shard write transaction.

Specifically, in MongoDB 4.4 and greater, db.collection.update() with upsert: true can be run on an existing collection or a non-existing collection. If run on a non-existing collection, the operation creates the collection.

In MongoDB 4.2 and earlier, the operation must be run on an existing collection.

Write Concerns and Transactions

Do not explicitly set the write concern for the operation if run in a transaction. To use write concern with transactions, see Transactions and Write Concern.

Upsert with Unique Index

When using the upsert: true option with the update() method, and not using a unique index on the query field(s), multiple instances of a update() operation with similar query field(s) could result in duplicate documents being inserted in certain circumstances.

Consider an example where no document with the name Andy exists and multiple clients issue the following command at roughly the same time:

db.people.update(
   { name: "Andy" },
   { $inc: { score: 1 } },
   {
     upsert: true,
     multi: true
   }
)

If all update() operations finish the query phase before any client successfully inserts data, and there is no unique index on the name field, each update() operation may result in an insert, creating multiple documents with name: Andy.

To ensure that only one such document is created, and the other update() operations update this new document instead, create a unique index on the name field. This guarantees that only one document with name: Andy is permitted in the collection.

With this unique index in place, the multiple update() operations now exhibit the following behavior:

• Exactly one update() operation will successfully insert a new document.

• All other update() operations will update the newly-inserted document, incrementing the score value.

Modify a Field Using the Values of the Other Fields in the Document

Create a members collection with the following documents:

db.members.insertMany( [
   { "_id" : 1, "member" : "abc123", "status" : "A", "points" : 2, "misc1" : "note to self: confirm status", "misc2" : "Need to activate", "lastUpdate" : ISODate("2019-01-01T00:00:00Z") },
   { "_id" : 2, "member" : "xyz123", "status" : "A", "points" : 60, "misc1" : "reminder: ping me at 100pts", "misc2" : "Some random comment", "lastUpdate" : ISODate("2019-01-01T00:00:00Z") }
] )

Assume that instead of separate misc1 and misc2 fields, you want to gather these into a new comments field. The following update operation uses an aggregation pipeline to:

• add the new comments field and set the lastUpdate field.

• remove the misc1 and misc2 fields for all documents in the collection.

db.members.update(
   { },
   [
      { $set: { status: "Modified", comments: [ "$misc1", "$misc2" ], lastUpdate: "$$NOW" } },
      { $unset: [ "misc1", "misc2" ] }
   ],
   { multi: true }
)

First Stage

The $set stage:

• creates a new array field comments whose elements are the current content of the misc1 and misc2 fields and

• sets the field lastUpdate to the value of the aggregation variable NOW. The aggregation variable NOW resolves to the current datetime value and remains the same throughout the pipeline. To access aggregation variables, prefix the variable with double dollar signs $$ and enclose in quotes.

Second Stage

The $unset stage removes the misc1 and misc2 fields.

After the command, the collection contains the following documents:

{ "_id" : 1, "member" : "abc123", "status" : "Modified", "points" : 2, "lastUpdate" : ISODate("2020-01-23T05:11:45.784Z"), "comments" : [ "note to self: confirm status", "Need to activate" ] }
{ "_id" : 2, "member" : "xyz123", "status" : "Modified", "points" : 60, "lastUpdate" : ISODate("2020-01-23T05:11:45.784Z"), "comments" : [ "reminder: ping me at 100pts", "Some random comment" ] }

Perform Conditional Updates Based on Current Field Values

Create a students3 collection with the following documents:

db.students3.insertMany( [
   { "_id" : 1, "tests" : [ 95, 92, 90 ], "lastUpdate" : ISODate("2019-01-01T00:00:00Z") },
   { "_id" : 2, "tests" : [ 94, 88, 90 ], "lastUpdate" : ISODate("2019-01-01T00:00:00Z") },
   { "_id" : 3, "tests" : [ 70, 75, 82 ], "lastUpdate" : ISODate("2019-01-01T00:00:00Z") }
] )

Using an aggregation pipeline, you can update the documents with the calculated grade average and letter grade.

db.students3.update(
   { },
   [
     { $set: { average : { $trunc: [ { $avg: "$tests" }, 0 ] }, lastUpdate: "$$NOW" } },
     { $set: { grade: { $switch: {
                           branches: [
                               { case: { $gte: [ "$average", 90 ] }, then: "A" },
                               { case: { $gte: [ "$average", 80 ] }, then: "B" },
                               { case: { $gte: [ "$average", 70 ] }, then: "C" },
                               { case: { $gte: [ "$average", 60 ] }, then: "D" }
                           ],
                           default: "F"
     } } } }
   ],
   { multi: true }
)

First Stage

The $set stage:

• calculates a new field average based on the average of the tests field. See $avg for more information on the $avg aggregation operator and $trunc for more information on the $trunc truncate aggregation operator.

• sets the field lastUpdate to the value of the aggregation variable NOW. The aggregation variable NOW resolves to the current datetime value and remains the same throughout the pipeline. To access aggregation variables, prefix the variable with double dollar signs $$ and enclose in quotes.

Second Stage

The $set stage calculates a new field grade based on the average field calculated in the previous stage. See $switch for more information on the $switch aggregation operator.

After the command, the collection contains the following documents:

{ "_id" : 1, "tests" : [ 95, 92, 90 ], "lastUpdate" : ISODate("2020-01-24T17:29:35.340Z"), "average" : 92, "grade" : "A" }
{ "_id" : 2, "tests" : [ 94, 88, 90 ], "lastUpdate" : ISODate("2020-01-24T17:29:35.340Z"), "average" : 90, "grade" : "A" }
{ "_id" : 3, "tests" : [ 70, 75, 82 ], "lastUpdate" : ISODate("2020-01-24T17:29:35.340Z"), "average" : 75, "grade" : "C" }

Update Elements Match arrayFilters Criteria

To update all array elements which match a specified criteria, use the arrayFilters parameter.

In mongosh, create a students collection with the following documents:

db.students.insertMany( [
   { "_id" : 1, "grades" : [ 95, 92, 90 ] },
   { "_id" : 2, "grades" : [ 98, 100, 102 ] },
   { "_id" : 3, "grades" : [ 95, 110, 100 ] }
] )

To update all elements that are greater than or equal to 100 in the grades array, use the filtered positional operator $[<identifier>] with the arrayFilters option:

db.students.update(
   { grades: { $gte: 100 } },
   { $set: { "grades.$[element]" : 100 } },
   {
     multi: true,
     arrayFilters: [ { "element": { $gte: 100 } } ]
   }
)

After the operation, the collection contains the following documents:

{ "_id" : 1, "grades" : [ 95, 92, 90 ] }
{ "_id" : 2, "grades" : [ 98, 100, 100 ] }
{ "_id" : 3, "grades" : [ 95, 100, 100 ] }

Update Specific Elements of an Array of Documents

You can also use the arrayFilters parameter to update specific document fields within an array of documents.

In mongosh, create a students2 collection with the following documents:

db.students2.insertMany( [
  {
    "_id" : 1,
    "grades" : [
       { "grade" : 80, "mean" : 75, "std" : 6 },
       { "grade" : 85, "mean" : 90, "std" : 4 },
       { "grade" : 85, "mean" : 85, "std" : 6 }
    ]
  }
  {
     "_id" : 2,
     "grades" : [
        { "grade" : 90, "mean" : 75, "std" : 6 },
        { "grade" : 87, "mean" : 90, "std" : 3 },
        { "grade" : 85, "mean" : 85, "std" : 4 }
     ]
  }
] )

To modify the value of the mean field for all elements in the grades array where the grade is greater than or equal to 85, use the filtered positional operator $[<identifier>] with the arrayFilters:

db.students2.update(
   { },
   { $set: { "grades.$[elem].mean" : 100 } },
   {
     multi: true,
     arrayFilters: [ { "elem.grade": { $gte: 85 } } ]
   }
)

After the operation, the collection has the following documents:

{
   "_id" : 1,
   "grades" : [
      { "grade" : 80, "mean" : 75, "std" : 6 },
      { "grade" : 85, "mean" : 100, "std" : 4 },
      { "grade" : 85, "mean" : 100, "std" : 6 }
   ]
}
{
   "_id" : 2,
   "grades" : [
      { "grade" : 90, "mean" : 100, "std" : 6 },
      { "grade" : 87, "mean" : 100, "std" : 3 },
      { "grade" : 85, "mean" : 100, "std" : 4 }
   ]
}