Docs Menu
Docs Home
/
MongoDB Manual
/ /

Disable Transparent Huge Pages (THP)

On this page

  • Create a Service File
  • Using tuned and ktune

Transparent Huge Pages (THP) is a Linux memory management system that reduces the overhead of Translation Lookaside Buffer (TLB) lookups on machines with large amounts of memory by using larger memory pages.

However, database workloads often perform poorly with THP enabled, because they tend to have sparse rather than contiguous memory access patterns. When running MongoDB on Linux, THP should be disabled for best performance.

To ensure that THP is disabled before mongod starts, you should create a service file for your platform's initialization system that disables THP at boot. Instructions are provided below for both the systemd and the System V init initialization systems.

Additionally, for RHEL / CentOS systems that make use of ktune and tuned performance profiles, you must create a custom tuned profile as well.

To create a service file that disables THP, you will use the built-in initialization system for your platform. Recent versions of Linux tend to use systemd (which uses the systemctl command), while older versions of Linux tend to use System V init (which uses the service command). Refer to the documentation for your operating system for more information.

Use the initialization system appropriate for your platform:

1

Create the following file at /etc/systemd/system/disable-transparent-huge-pages.service:

[Unit]
Description=Disable Transparent Huge Pages (THP)
DefaultDependencies=no
After=sysinit.target local-fs.target
Before=mongod.service
[Service]
Type=oneshot
ExecStart=/bin/sh -c 'echo never | tee /sys/kernel/mm/transparent_hugepage/enabled > /dev/null'
[Install]
WantedBy=basic.target

Note

Some versions of Red Hat Enterprise Linux, and potentially other Red Hat-based derivatives, use a different path for the THP enabled file:

/sys/kernel/mm/redhat_transparent_hugepage/enabled

Check to see which path is in use on your system, and update the disable-transparent-huge-pages.service file accordingly.

Note

Prior to version 4.2, MongoDB also checks the THP defrag setting and presents a startup warning if defrag is enabled. As long as THP itself is disabled in the systemd unit file, MongoDB is unaffected by the defrag setting. However, to avoid this message, you may set defrag to never by adding the following additional line to the systemd unit file, just after the existing ExecStart statement:

ExecStart=/bin/sh -c 'echo never | tee /sys/kernel/mm/transparent_hugepage/defrag > /dev/null'

If on Red Hat or similar, the path to the defrag file might be different. See the note above for more details, and and update the disable-transparent-huge-pages.service file accordingly.

2

Run the following command to reload systemd unit files to make disable-transparent-huge-pages.service available for use:

sudo systemctl daemon-reload
3

Start the service manually once to ensure that the appropriate THP setting has been changed:

sudo systemctl start disable-transparent-huge-pages

Verify that THP has successfully been set to [never] by running the following command:

cat /sys/kernel/mm/transparent_hugepage/enabled

On Red Hat Enterprise Linux and potentially other Red Hat-based derivatives, you may instead need to use the following:

cat /sys/kernel/mm/redhat_transparent_hugepage/enabled
4

To ensure that this setting is applied each time your system boots, run the following command:

sudo systemctl enable disable-transparent-huge-pages
5

If you are using tuned or ktune on RHEL/ CentOS, you must now also create a custom tuned profile.

1

Create the following file at /etc/init.d/disable-transparent-hugepages:

#!/bin/bash
### BEGIN INIT INFO
# Provides: disable-transparent-hugepages
# Required-Start: $local_fs
# Required-Stop:
# X-Start-Before: mongod mongodb-mms-automation-agent
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Disable Linux transparent huge pages
# Description: Disable Linux transparent huge pages, to improve
# database performance.
### END INIT INFO
case $1 in
start)
if [ -d /sys/kernel/mm/transparent_hugepage ]; then
thp_path=/sys/kernel/mm/transparent_hugepage
elif [ -d /sys/kernel/mm/redhat_transparent_hugepage ]; then
thp_path=/sys/kernel/mm/redhat_transparent_hugepage
else
return 0
fi
echo 'never' | tee ${thp_path}/enabled > /dev/null
unset thp_path
;;
esac

Note

Prior to version 4.2, MongoDB also checks the THP defrag setting and presents a startup warning if defrag is enabled. As long as THP itself is disabled in the init.d script, MongoDB is unaffected by the defrag setting. However, to avoid this message, you may set defrag to never by adding the following line to the init.d script, just before the unset thp_path statement:

echo 'never' | tee ${thp_path}/defrag > /dev/null
2

Run the following command to make the script executable:

sudo chmod 755 /etc/init.d/disable-transparent-hugepages
3

Run the script manually once to ensure that the appropriate THP setting has been changed:

sudo /etc/init.d/disable-transparent-hugepages start

Verify that THP has successfully been set to [never] by running the following command:

cat /sys/kernel/mm/transparent_hugepage/enabled

On Red Hat Enterprise Linux and potentially other Red Hat-based derivatives, you may instead need to use the following:

cat /sys/kernel/mm/redhat_transparent_hugepage/enabled
4

To ensure that this setting is applied each time your system boots, run the following command for your Linux distribution:

Distribution
Command
Ubuntu and Debian
sudo update-rc.d disable-transparent-hugepages defaults
SUSE
sudo insserv /etc/init.d/disable-transparent-hugepages
Red Hat, CentOS, Amazon Linux, and derivatives
sudo chkconfig --add disable-transparent-hugepages
5

If you are using tuned or ktune on RHEL/ CentOS, you must now also create a custom tuned profile.

Important

If using tuned or ktune, you must also perform the steps in this section after creating the service file above.

tuned and ktune are dynamic kernel tuning tools that can affect the transparent huge pages setting on your system. If you are using tuned / ktune on your RHEL / CentOS system while running mongod, you must create a custom tuned profile to ensure that THP remains disabled.

1

Create a new profile from an existing profile by copying the relevant directory. This example uses the virtual-guest profile as the base, and uses virtual-guest-no-thp as the new profile:

sudo cp -r /etc/tune-profiles/virtual-guest /etc/tune-profiles/virtual-guest-no-thp
2

Edit /etc/tune-profiles/virtual-guest-no-thp/ktune.sh and change the set_transparent_hugepages setting to the following:

set_transparent_hugepages never
3

Enable the new profile:

sudo tuned-adm profile virtual-guest-no-thp
1

Create a new directory to hold the custom tuned profile. This example inherits from the existing virtual-guest profile, and uses virtual-guest-no-thp as the new profile:

sudo mkdir /etc/tuned/virtual-guest-no-thp
2

Create and edit /etc/tuned/virtual-guest-no-thp/tuned.conf so that it contains the following:

[main]
include=virtual-guest
[vm]
transparent_hugepages=never

This example inherits from the existing virtual-guest profile. Select the profile most appropriate for your system.

3

Enable the new profile:

sudo tuned-adm profile virtual-guest-no-thp

Back

Database Profiler Output