Deploy a Sharded Cluster¶

On this page

Prerequisites
Considerations
Procedure

Sharded clusters provide horizontal scaling for large data sets and enable high throughput operations by distributing the data set across a group of servers.

To learn more about sharding, see Sharding Introduction in the MongoDB manual.

Use this procedure to deploy a new sharded cluster that Ops Manager manages. Later, you can use Ops Manager to add shards and perform other maintenance operations on the cluster.

Added in Ops Manager 4.0

You can use Kubernetes to deploy MongoDB instances with Ops Manager version 4.0 or later.

To learn how to deploy a sharded cluster using a Kubernetes object, see Deploy a Sharded Cluster in the MongoDB Enterprise Kubernetes Operator documentation.

Prerequisites¶

To deploy MongoDB clusters, you must provision hosts to serve those clusters. Ops Manager requires access to these hosts.

Important

If you run MongoDB Enterprise and provision your own Linux hosts, then you must manually install a set of dependencies to each server before installing MongoDB. The MongoDB manual provides the appropriate command to install the dependencies.

To learn more about the specifics for an operating system, see the following:

Considerations¶

Unique Names for Sharded Clusters¶

Use unique names for the new cluster and its shards.

Important

Replica set, sharded cluster, and shard names within the same project must be unique. Failure to have unique names for the deployments will result in broken backup snapshots.

Do Not Deploy Monitoring Agents inside and outside Kubernetes¶

Do not mix MongoDB deployments outside Kubernetes with ones inside Kubernetes in the same Project.

Due to Kubernetes network translation, a Monitoring Agent outside Kubernetes cannot monitor MongoDB instances inside Kubernetes. For this reason, k8s and non-k8s deployments in the same Project is not supported. Use separate projects.

Configuration Server Deployment Architecture¶

New in version Ops: Manager 4.0

If you select MongoDB 3.2 or later for your configuration server mongod processes, Ops Manager deploys your configuration servers as a replica set. If you select replica set. MongoDB 3.0 or earlier for your configuration server mongod processes, Ops Manager deploys mirrored configuration servers.

To learn more about CSRS and mirrored configuration servers (SCCC), see Config Servers.

Removing a Shard¶

When you remove a shard, any unsharded databases in that shard are moved to a remaining shard using the movePrimary command.

All sharded collections remain online and available during the shard removal process. However, read and write operations sent to unsharded collections during the movePrimary operation can result in unexpected behavior, including failure of the migration or loss of data.

We recommend moving the primary shard for any databases containing unsharded collections before removing the shard.

To learn more about removing shards, see Remove Shards from an Existing Sharded Cluster.

Procedure¶

1

Navigate to the Deployment page for your project.¶

If it is not already displayed, select the organization that contains your desired project from the office icon Organizations menu in the navigation bar.
If it is not already displayed, select your desired project from the Projects menu in the navigation bar.
If it is not already displayed, click Deployment in the sidebar.

2

Open the Cluster Creation View.¶

Click the Add New arrow in the top-right of the Deployment page. Select New Cluster from the drop-down menu to open the Create New Cluster view.

3

Configure Cluster-Wide Settings.¶

The Cluster Configuration section contains the following cluster-wide configuration settings. Settings marked with an * asterisk in the Ops Manager UI are required.

Setting	Description
Cluster Name	Specify the name of your sharded cluster deployment. You cannot change this once set.
Config Server Replica Set Name	Specify the name of your Config Server Replica Set. You cannot change this once set. This setting corresponds to the `_id` replica configuration option. Ops Manager only displays this option if you selected MongoDB 3.2 or later as the Version of your configuration servers.
Shard Name Prefix	Specify the prefix of each shard in the cluster. Ops Manager names each shard in the cluster using the `<prefix_n>` format, where `n` is a 0-indexed, monotonically increasing integer.
Process Name	Hostname and port of a `mongod` or `mongos` associated to the sharded cluster. This hostname can be a hostname, an FQDN, an IPv4 address, or an IPv6 address. Ops Manager groups `mongod` processes under their parent replica set name, and `mongos` processes under mongoses. Ops Manager then groups all the cluster components under the cluster name. Click the caret right icon to the left of a grouping to list its sub-groups or processes. Modifying any of the available settings for a grouping changes the corresponding value in its sub-groups and processes. Note For clusters running MongoDB 3.0 or earlier, Ops Manager groups the config server `mongod` processes under configServers.
Version	Select the MongoDB server version of the `mongod` or `mongos` process. Available Versions Ops Manager lists only the MongoDB versions that are available for your deployment. To disable this filtering, see `automation.versions.download.baseUrl.allowOnlyAvailableBuilds`.
Data Directory	Specify the directory where the `mongod` process stores data files. This setting corresponds to the `storage.dbPath` `mongod` configuration file option. The Ops Manager Automation must have file system permission to read, write, and execute all files and folders in the specified directory. Each `mongod` process must have its own database directory. If deploying multiple `mongod` processes on the same host, ensure each process has its own distinct directory.
Log File	Specify the full path to the `mongod` or `mongos` log file, including the log file name and extension. This setting corresponds to the `systemLog.path` configuration file option. The `mongod` or `mongos` must have permission to read and write to the specified file. Example Specifying `/var/log/mongodb/mongo.log` directs the `mongod` or `mongos` to store its logfile to `/var/log/mongodb/` as `mongo.log`. The `mongod` or `mongos` have its own unique log file. If deploying multiple `mongod` or `mongos` processes to the same host, ensure each `mongod` or `mongos` has its own distinct logfile.

4

Configure Each Shard in Your Cluster.¶

From the Member Configuration section, click Shard Settings to open the shard configuration options. Ops Manager lists each shard in the cluster and the mongod processes associated to that shard. Each shard process has the following options:

Setting	Description
Member	Select one of the following replica set member roles from the menu: `Default` A data-bearing member of the replica set that can become the primary and vote in elections. Arbiter A non-data bearing member of the replica set that can vote in elections. Corresponds to the `arbiterOnly` replica configuration option. Hidden A data-bearing member of the replica set that can vote in elections. Corresponds to the `hidden` replica configuration option. Delayed Hidden A data-bearing member of the replica set that can vote in elections. Corresponds to the `secondaryDelaySecs` and `hidden` replica configuration options.
Hostname	Select from the menu the host to which Ops Manager Automation deploys the replica set member. The menu only lists hosts under Ops Manager Automation. For complete documentation on adding servers to Ops Manager Automation, see Provision Servers for Automation. This hostname can be a hostname, an FQDN, an IPv4 address, or an IPv6 address.
Port	Specify the IANA port number for the `mongod` process. This setting corresponds to the `net.port` configuration file option. Defaults to `27017`. The `mongod` must have exclusive access to the specified port. If deploying multiple `mongod` processes to a single host, you must select a unique unused port for each process.
Votes	Specify the number of votes that the replica set member has during elections. This setting corresponds to the `votes` `mongod` replica set configuration option.
Priority	Specify the priority of the member during elections. Replica set members with a priority of `0` cannot become the primary and cannot trigger elections. This setting corresponds to the `priority` `mongod` replica set configuration option.
Delay	Specify the number of seconds “behind” the primary member this member should “lag”. This setting corresponds to the `secondaryDelaySecs` `mongod` replica set configuration option.
Build Indexes	Specify `true` to direct the `mongod` to build indexes. This setting corresponds to the `buildIndexes` `mongod` replica set configuration option.
Tags	Specify the tag or tags associated to the replica set. This setting corresponds to the `tags` `mongod` replica set configuration option. For complete documentation on replica set tags, see Replica Set Tags
Add a Mongod	Adds an additional `mongod` process as a replica set member. Adding a new `mongod` process also updates the list of processes in the Cluster Configuration section. You must configure the Version, Data Directory, and Log File of the new process.

To add additional shards to the cluster:

Click Add a Shard.
Under the Cluster Configuration section, set the following parameters for each mongod in the shard:
- Version
- Data Directory
- Log File

5

Configure Each Configuration Server in Your Cluster.¶

Ops Manager displays a different heading for your configuration server settings depending on the MongoDB version you selected for your configuration servers.

MongoDB 3.2 or Later:

From the Member Configuration section, click Config Server Replica Set Settings to open the CSRS configuration options. Each config server replica set member has the following options:

Setting	Description
Member	Select one of the following replica set member roles from the menu: `Default` A data-bearing member of the replica set that can become the primary and vote in elections. Arbiter A non-data bearing member of the replica set that can vote in elections. Corresponds to the `arbiterOnly` replica configuration option. Hidden A data-bearing member of the replica set that can vote in elections. Corresponds to the `hidden` replica configuration option. Delayed Hidden A data-bearing member of the replica set that can vote in elections. Corresponds to the `secondaryDelaySecs` and `hidden` replica configuration options.
Hostname	Select from the menu the host to which Ops Manager Automation deploys the replica set member. The menu only lists hosts under Ops Manager Automation. For complete documentation on adding servers to Ops Manager Automation, see Provision Servers for Automation. This hostname can be a hostname, an FQDN, an IPv4 address, or an IPv6 address.
Port	Specify the IANA port number for the `mongod` process. This setting corresponds to the `net.port` configuration file option. Defaults to `27017`. The `mongod` must have exclusive access to the specified port. If deploying multiple `mongod` processes to a single host, you must select a unique unused port for each process.
Votes	Specify the number of votes that the replica set member has during elections. This setting corresponds to the `votes` `mongod` replica set configuration option.
Priority	Specify the priority of the member during elections. Replica set members with a priority of `0` cannot become the primary and cannot trigger elections. This setting corresponds to the `priority` `mongod` replica set configuration option.
Delay	Specify the number of seconds “behind” the primary member this member should “lag”. This setting corresponds to the `secondaryDelaySecs` `mongod` replica set configuration option.
Build Indexes	Specify `true` to direct the `mongod` to build indexes. This setting corresponds to the `buildIndexes` `mongod` replica set configuration option.
Tags	Specify the tag or tags associated to the replica set. This setting corresponds to the `tags` `mongod` replica set configuration option. For complete documentation on replica set tags, see Replica Set Tags
Add a Mongod	Adds an additional `mongod` process as a replica set member. Adding a new `mongod` process also updates the list of processes in the Cluster Configuration section. You must configure the Version, Data Directory, and Log File of the new process.

MongoDB 3.0 or Earlier

From the Member Configuration section, click Config Server Settings to open the configuration server options. Each configuration server has the following options:

Setting Description

Hostname

Select from the menu the host to which Ops Manager Automation deploys the replica set member. The menu only lists hosts under Ops Manager Automation. For complete documentation on adding servers to Ops Manager Automation, see Provision Servers for Automation.

This hostname can be a hostname, an FQDN, an IPv4 address, or an IPv6 address.

Port

Specify the IANA port number for the mongod process. This setting corresponds to the net.port configuration file option. Defaults to 27017.

The mongod must have exclusive access to the specified port. If deploying multiple mongod processes to a single host, you must select a unique unused port for each process.

6

Configure Each `mongos` in Your Cluster.¶

From the Member Configuration section, click Mongos Settings to open the mongos configuration options. Each mongos process has the following options:

Setting Description

Hostname

Select from the menu the host to which Ops Manager Automation deploys the mongos. The menu only lists hosts under Ops Manager Automation. For complete documentation on adding servers to Ops Manager Automation, see Provision Servers for Automation.

This hostname can be a hostname, an FQDN, an IPv4 address, or an IPv6 address.

Port

Specify the IANA port number for the mongos process. This setting corresponds to the net.port configuration file option. Defaults to 27017.

The mongos must have exclusive access to the specified port. If deploying multiple mongos processes to a single host, you must select a unique unused port for each process.

Add a Mongos Click to add an additional mongos process.

6

Set the default read and write concerns for your MongoDB replica set.¶

In the Default Read Concerns/Write Concerns card, you configure the default level of acknowledgement requested from MongoDB for read and write operations for this cluster. Setting the default read and write concern can help with MongoDB 5.0 deployments using arbiters.

From the Default Read Concerns section, you can set consistency and isolation properties for the data read from the cluster.

Select the default read concern from the Level dropdown menu. You can choose from the following values:

local, the MongoDB 5.0 default value,
available, the MongoDB 4.4 default value, or
majority.

From the Default Write Concerns section, you configure the default level of acknowledgment requested from MongoDB for write operations from the cluster. You can set three parameters:

Parameter Value

w Option

Desired number of mongod instances that must acknowledge a write operation. You can enter one of the following values:

majority, the MongoDB 5.0 default value, or
Any positive integer. MongoDB 4.4 defaults to 1.

j Option Flag that indicates whether the write acknowledgement must be written to the on-disk journal.

w Timeout Desired time limit for the write concern expressed in milliseconds. Set this value when you set w to a value greater than 1 including majority.

7

Configure Each Replica Set in your Cluster.¶

The Replication Settings section contains the following configuration options for each replica set in the cluster:

Setting	Description
Protocol Version	Select the replication protocol version used by the replica set. This setting corresponds to the `protocolVersion` replica set configuration option. For more information, see Replica Set Protocol Versions.
Chaining Allowed	Specify `true` to allow secondary members to replicate from other secondary members. This setting corresponds to the `chainingAllowed` replica set configuration option.
Write Concern Majority Journal Default	Determines the behavior of `{w:"majority"}` write concern if the write concern does not explicitly specify the journal option `j`. This setting corresponds to the `writeConcernMajorityJournalDefault` replica set configuration option.
Heartbeat Timeout (secs)	Specify the number of seconds that the replica set members wait for a successful heartbeat from each other. This setting corresponds to the `heartbeatTimeoutSecs` replica set configuration option.
Election Timeout (ms)	Specify the time limit in milliseconds for detecting when a replica set’s primary is unreachable. This setting corresponds to the `electionTimeoutMillis` replica set configuration option.
CatchUp Timeout (ms)	Specify the time limit in milliseconds for a newly elected primary to sync, or catch up, with the other replica set members that may have more recent writes. This setting corresponds to the `catchUpTimeoutMillis` replica set configuration option.
CatchUp Takeover Delay (ms)	Specify the time in milliseconds a node waits to initiate a catchup takeover after determining it is ahead of the current primary. This setting corresponds to the `catchUpTakeoverDelayMillis` replica set configuration option.
Last Error Defaults	Specify the default write concern for the replica set. The replica set uses this write concern only when write operations or getLastError specify no other write concern. If this option is not set, the default write concern for the replica set only requires confirmation from the primary. Specify this option in the form of a document, i.e., `{"w":2}`.
Force Reconfigure	Specify that you want to force a reconfiguration of the replica set. When set to `Yes`, the MongoDB Agent forces the replica set to accept a new configuration even if a majority of its members are unavailable. Warning Forcing a replica set reconfiguration might lead to a rollback of majority-committed writes. Proceed with caution. Contact MongoDB Support if you have questions about the potential impacts of this operation. See also Reconfigure a Replica Set with Unavailable Members in the MongoDB Server Manual.

8

Set any advanced configuration options for your MongoDB sharded cluster.¶

The Advanced Configuration Options section allows you to set MongoDB runtime options for each MongoDB process in your deployment.

To add an option:

Click Add Option.
From the Select a Process Type menu, click the process for which you want to add an option.
Click Select a Startup Option and select the configuration option.
Ops Manager displays a context-sensitive input for configuring an acceptable value for the selected option.
Click Add to add the selected option and its corresponding value to every process of the selected process type in the cluster.

Ops Manager lists each process in the cluster grouped logically. Click the grey arrow to the left of the logical grouping to display its sub-groupings and processes. You can modify the advanced options for each process individually as necessary.

For descriptions of the available Advanced Configuration Options, see Advanced Options for MongoDB Deployments.

9

Click Create Cluster.¶

Ops Manager redirects you to the Deployment view, where you must review the cluster configuration before Ops Manager begins deployment.

10

Click Review & Deploy to review your changes.¶

11

Review and approve your changes.¶

Ops Manager displays your proposed changes.

If you are satisfied, click Confirm & Deploy.
If you want to make further configuration changes, click Cancel. Click Modify for the cluster to make additional changes.

← Deploy a Replica Set Deploy a Standalone MongoDB Instance →