replSetStepDown
On this page
Description
replSetStepDown
Instructs the primary of the replica set to become a secondary. After the primary steps down, eligible secondaries will hold an election for primary.
The command does not immediately step down the primary. If no
electable
secondaries are up to date with the primary, the primary waits up tosecondaryCatchUpPeriodSecs
(by default 10 seconds) for a secondary to catch up. Once an electable secondary is available, the command steps down the primary.Once stepped down, the original primary becomes a secondary and is ineligible from becoming primary again for the remainder of time specified by
replSetStepDown: <seconds>
.For a detailed explanation of the command 's execution, see Behavior.
Note
The command is only valid against the primary and throws an error if run on a non-primary member.
Tip
In
mongosh
, this command can also be run through thers.stepDown()
helper method.Helper methods are convenient for
mongosh
users, but they may not return the same level of information as database commands. In cases where the convenience is not needed or the additional return fields are required, use the database command.The
replSetStepDown
can only run on theadmin
database.
Syntax
The command has the following syntax:
db.adminCommand( { replSetStepDown: <seconds>, secondaryCatchUpPeriodSecs: <seconds>, force: <true|false> } )
Command Fields
The command takes the following fields:
Field | Type | Description |
---|---|---|
replSetStepDown | number | The number of seconds to step down the primary, during which time the
stepdown member is ineligible for becoming primary. If you specify a
non-numeric value, the command uses The stepdown period starts from the time that the
|
secondaryCatchUpPeriodSecs | number | Optional. The number of seconds that the When specified, |
force | boolean | Optional. A boolean that determines whether the primary steps down if no electable and up-to-date secondary exists within the wait period. If If Defaults to |
Behavior
Concurrent Operations
The replSetStepDown
command attempts to
terminate long running user operations that block the primary
from stepping down, such as an index build, a write operation or a
map-reduce job.
Availability of Eligible Secondaries
The command then initiates a catchup period where it waits up to
secondaryCatchUpPeriodSeconds
, by default 10 seconds, for a
secondary to become up-to-date with the primary. The primary only steps
down if a secondary is up-to-date with the primary during the
catchup period to prevent rollbacks.
If no electable secondary meets this criterion by the end of the waiting
period, the primary does not step down and the command errors.
You can override this behavior and issue with command with the force: true
option to immediately step down the primary.
Once the primary steps down successfully, that node cannot become the
primary for the remainder of the replSetStepDown: <seconds>
period,
which began when the node received the command.
Client Connections
Starting in MongoDB 4.2, replSetStepDown
command no
longer closes all client connections.
In MongoDB 4.0 and earlier, replSetStepDown
command
closes all client connections during the step down. Because the
disconnect includes the connection used to run the command,
you cannot retrieve the return status of the command if the
command completes successfully. You can only retrieve the
return status of the command if it errors. When running the
4.0 and earlier command in a script, the script should
account for this behavior.
Writes During Stepdown
Note
All writes to the primary fail during the period starting when the
replSetStepDown
command is received until either a new
primary is elected, or if there are no electable secondaries, the
original primary resumes normal operation.
Writes that were in progress when replSetStepDown
is run
are killed. In-progress transactions
also fail with TransientTransactionError
and can be
retried as a whole.
The time period where writes fail is at maximum:
secondaryCatchUpPeriodSecs
(10s by default) +
electionTimeoutMillis
(10s by default).
Election Handoff
When you step down a primary using rs.stepDown()
or
replSetStepDown
without setting the force
field to
true
, the stepped-down primary nominates an eligible secondary
to call an election immediately.
Examples
Step Down with Default Options
The following example, run on the current primary, attempts to step
down the member for 120
seconds.
The operation waits up to the default 10
seconds for a
secondary to catch up. If no suitable secondary exists, the primary
does not step down and the command errors.
Note
All writes to the primary fail during the period starting when the
replSetStepDown
command is received until either a new
primary is elected, or if there are no electable secondaries, the
original primary resumes normal operation.
Writes that were in progress when replSetStepDown
is run
are killed. In-progress transactions
also fail with TransientTransactionError
and can be
retried as a whole.
The time period where writes fail is at maximum:
secondaryCatchUpPeriodSecs
(10s by default) +
electionTimeoutMillis
(10s by default).
db.adminCommand( { replSetStepDown: 120 } )
Specify Wait Time for Secondary Catch Up
The following example, run on the current primary, attempts to step
down the member for 120
seconds, waiting up to 15
seconds for
an electable secondary to catch up. If no suitable secondary exists,
the primary does not step down and the command errors.
Note
All writes to the primary fail during the period starting when the
replSetStepDown
command is received until either a new
primary is elected, or if there are no electable secondaries, the
original primary resumes normal operation.
Writes that were in progress when replSetStepDown
is run
are killed. In-progress transactions
also fail with TransientTransactionError
and can be
retried as a whole.
The time period where writes fail is at maximum:
secondaryCatchUpPeriodSecs
(10s by default) +
electionTimeoutMillis
(10s by default).
db.adminCommand( { replSetStepDown: 120, secondaryCatchUpPeriodSecs: 15 } )
Specify Secondary Catch Up with Force Step Down
The following example, run on the current primary, attempts to step
down the member for 120
seconds, waiting up to 15
seconds for
an electable secondary to catch up. Because of the force: true
option, the primary steps down even if no suitable secondary exists.
Note
All writes to the primary fail during the period starting when the
replSetStepDown
command is received until either a new
primary is elected, or if there are no electable secondaries, the
original primary resumes normal operation.
Writes that were in progress when replSetStepDown
is run
are killed. In-progress transactions
also fail with TransientTransactionError
and can be
retried as a whole.
The time period where writes fail is at maximum:
secondaryCatchUpPeriodSecs
(10s by default) +
electionTimeoutMillis
(10s by default).
db.adminCommand( { replSetStepDown: 120, secondaryCatchUpPeriodSecs: 15, force: true } )