Docs Menu
Docs Home
/
MongoDB Manual
/ /

update Event

On this page

  • Summary
  • Description
  • Behavior
  • Document Pre- and Post-Images
  • Path Disambiguation
  • Example
update

An update event occurs when an operation updates a document in a collection.

Note

Disambiguation

To learn more about events that occur when collection options are modified, see the modify event.

Field
Type
Description
_id
Document

A BSON object which serves as an identifier for the change stream event. This value is used as the resumeToken for the resumeAfter parameter when resuming a change stream. The _id object has the following form:

{
"_data" : <BinData|hex string>
}

The _data type depends on the MongoDB versions and, in some cases, the feature compatibility version (fCV) at the time of the change stream's opening or resumption. See Resume Tokens for the full list of _data types.

For an example of resuming a change stream by resumeToken, see Resume a Change Stream.

clusterTime
Timestamp

The timestamp from the oplog entry associated with the event.

Change stream event notifications associated with a multi-document transaction all have the same clusterTime value: the time when the transaction was committed.

On sharded clusters, events with the same clusterTime may not all relate to the same transaction. Some events don't relate to a transaction at all.

To identify events for a single transaction, you can use the combination of lsid and txnNumber in the change stream event document.

New in version 4.0.

collectionUUID
UUID

UUID identifying the collection where the change occurred.

New in version 6.0.

documentKey
document

Document that contains the _id value of the document created or modified by the CRUD operation.

For sharded collections, this field also displays the full shard key for the document. The _id field is not repeated if it is already a part of the shard key.

fullDocument
document

The document created or modified by a CRUD operation.

This field only appears if you configured the change stream with fullDocument set to updateLookup. When you configure the change stream with updateLookup, the field represents the current majority-committed version of the document modified by the update operation. The document may differ from the changes described in updateDescription if any other majority-committed operations have modified the document between the original update operation and the full document lookup.

For more information, see Lookup Full Document for Update Operations.

Changed in version 6.0.

Starting in MongoDB 6.0, if you set the changeStreamPreAndPostImages option using db.createCollection(), create, or collMod, then the fullDocument field shows the document after it was inserted, replaced, or updated (the document post-image). fullDocument is always included for insert events.

fullDocumentBeforeChange
document

The document before changes were applied by the operation. That is, the document pre-image.

This field is available when you enable the changeStreamPreAndPostImages field for a collection using db.createCollection() method or the create or collMod commands.

New in version 6.0.

lsid
document

The identifier for the session associated with the transaction.

Only present if the operation is part of a multi-document transaction.

New in version 4.0.

ns
document

The namespace (database and or collection) affected by the event.

ns.coll
string

The name of the collection where the event occurred.

ns.db
string

The name of the database where the event occurred.

operationType
string

The type of operation that the change notification reports.

Returns a value of update for these change events.

updateDescription
document

A document describing the fields that were updated or removed by the update operation.

updateDescription.
disambiguatedPaths
document

A document that provides clarification of ambiguous field descriptors in updateDescription.

When the update change event describes changes on a field where the path contains a period (.) or where the path includes a non-array numeric subfield, the disambiguatedPath field provides a document with an array that lists each entry in the path to the modified field.

Requires that you set the showExpandedEvents option to true.

New in version 6.1.

updateDescription.
removedFields
array

An array of fields that were removed by the update operation.

updateDescription.
truncatedArrays
array

An array of documents which record array truncations performed with pipeline-based updates using one or more of the following stages:

Note

If the entire array is replaced, the truncations will be reported under updateDescription.updatedFields.

updateDescription.
truncatedArrays.
field
string

The name of the truncated field.

updateDescription.
truncatedArrays.
newSize
integer

The number of elements in the truncated array.

updateDescription.
updatedFields
document

A document whose keys correspond to the fields that were modified by the update operation. The value of each field corresponds to the new value of those fields, rather than the operation that resulted in the new value.

txnNumber
NumberLong

Together with the lsid, a number that helps uniquely identify a transction.

Only present if the operation is part of a multi-document transaction.

New in version 4.0.

wallTime

The server date and time of the database operation. wallTime differs from clusterTime in that clusterTime is a timestamp taken from the oplog entry associated with the database operation event.

New in version 6.0.

Starting in MongoDB 6.0, you see a fullDocumentBeforeChange document with the fields before the document was changed (or deleted) if you perform these steps:

  1. Enable the new changeStreamPreAndPostImages field for a collection using db.createCollection(), create, or collMod.

  2. Set fullDocumentBeforeChange to "required" or "whenAvailable" in db.collection.watch().

Example fullDocumentBeforeChange document in the change stream output:

"fullDocumentBeforeChange" : {
"_id" : ObjectId("599af247bb69cd89961c986d"),
"userName" : "alice123",
"name" : "Alice Smith"
}

For complete examples with the change stream output, see Change Streams with Document Pre- and Post-Images.

Pre- and post-images are not available for a change stream event if the images were:

  • Not enabled on the collection at the time of a document update or delete operation.

  • Removed after the pre- and post-image retention time set in expireAfterSeconds.

    • The following example sets expireAfterSeconds to 100 seconds:

      use admin
      db.runCommand( {
      setClusterParameter:
      { changeStreamOptions: { preAndPostImages: { expireAfterSeconds: 100 } } }
      } )
    • The following example returns the current changeStreamOptions settings, including expireAfterSeconds:

      db.adminCommand( { getClusterParameter: "changeStreamOptions" } )
    • Setting expireAfterSeconds to off uses the default retention policy: pre- and post-images are retained until the corresponding change stream events are removed from the oplog.

    • If a change stream event is removed from the oplog, then the corresponding pre- and post-images are also deleted regardless of the expireAfterSeconds pre- and post-image retention time.

Additional considerations:

  • Enabling pre- and post-images consumes storage space and adds processing time. Only enable pre- and post-images if you need them.

  • Limit the change stream event size to less than 16 megabytes. To limit the event size, you can:

    • Limit the document size to 8 megabytes. You can request pre- and post-images simultaneously in the change stream output if other change stream event fields like updateDescription are not large.

    • Request only post-images in the change stream output for documents up to 16 megabytes if other change stream event fields like updateDescription are not large.

    • Request only pre-images in the change stream output for documents up to 16 megabytes if:

      • document updates affect only a small fraction of the document structure or content, and

      • do not cause a replace change event. A replace event always includes the post-image.

  • To request a pre-image, you set fullDocumentBeforeChange to required or whenAvailable in db.collection.watch(). To request a post-image, you set fullDocument using the same method.

  • Pre-images are written to the config.system.preimages collection.

    • The config.system.preimages collection may become large. To limit the collection size, you can set expireAfterSeconds time for the pre-images as shown earlier.

    • Pre-images are removed asynchronously by a background process.

Important

Backward-Incompatible Feature

Starting in MongoDB 6.0, if you are using document pre- and post-images for change streams, you must disable changeStreamPreAndPostImages for each collection using the collMod command before you can downgrade to an earlier MongoDB version.

Tip

See also:

New in version 6.1.

The updateDescription field notes changes made to specific fields in documents by an operation. These field descriptors use dots (.) as path separators and numbers as array indexes, which leads to some ambiguity when it contains field names that use dots or numbers.

When an update event reports changes involving ambiguous fields, the disambiguatedPaths document provides the path key with an array listing each path component.

Note

The disambiguatedPaths field is only available on change streams started with the showExpandedEvents option

For example, consider a document that lists people and the towns in which they live:

{
"name": "Anthony Trollope",
"home.town": "Oxford",
"residences": [
{"0": "Oxford"},
{"1": "Sunbury"}
]
}
  • When an update modifies the home.town field from Oxford to London, it produces an update description that looks like this:

    "updateDescription": {
    "updatedFields": {
    "home.town": "London"
    },
    "disambiguatedPaths": {
    "home.town": [ "home.town" ]
    }
    }

    Because the field home.town contains a period, the disambiguatedPaths field shows an array with one value, to indicate that town is not a sub-field of home.

  • When an update modifies a value in the residences array to make the same change, it produces an update description that looks like this:

    "updateDescription": {
    "updatedFields": {
    "residences.0.0": "London"
    },
    "disambiguatedPaths": { "residences.0.0": [ "residences", 0, "0" ] }
    }

    The disambiguated paths include an integer 0 to indicate the array index and the string "0" to indicate the field name within the nested document.

There are two cases where disambiguatedPath does not include a numeric field:

  • When the first field in the path is a numeric string (i.e. 0.name). This is not ambiguous since the first field cannot be an array index.

  • When the numeric string field has leading zeroes (i.e., 0001). This is not ambiguous since an integer cannot have leading zeroes.

The following example illustrates an update event:

{
"_id": { <Resume Token> },
"operationType": "update",
"clusterTime": <Timestamp>,
"wallTime": <ISODate>,
"ns": {
"db": "engineering",
"coll": "users"
},
"documentKey": {
"_id": ObjectId("58a4eb4a30c75625e00d2820")
},
"updateDescription": {
"updatedFields": {
"email": "alice@10gen.com"
},
"removedFields": ["phoneNumber"],
"truncatedArrays": [ {
"field" : "vacation_time",
"newSize" : 36
} ]
}
}

The following example illustrates an update event for change streams opened with the fullDocument : updateLookup option:

{
"_id": { <Resume Token> },
"operationType": "update",
"clusterTime": <Timestamp>,
"wallTime": <ISODate>,
"ns": {
"db": "engineering",
"coll": "users"
},
"documentKey": {
"_id": ObjectId("58a4eb4a30c75625e00d2820")
},
"updateDescription": {
"updatedFields": {
"email": "alice@10gen.com"
},
"removedFields": ["phoneNumber"],
"truncatedArrays": [ {
"field" : "vacation_time",
"newSize" : 36
} ],
"disambiguatedPaths": { }
},
"fullDocument": {
"_id": ObjectId("58a4eb4a30c75625e00d2820"),
"name": "Alice",
"userName": "alice123",
"email": "alice@10gen.com",
"team": "replication"
}
}

The fullDocument document represents the most current majority-committed version of the updated document. The fullDocument document may vary from the document at the time of the update operation depending on the number of interleaving majority-committed operations that occur between the update operation and the document lookup.

Back

shardCollection